Filter By:
- BMX (2)
- Bottom Brackets (20)
- Brakes/Levers/Pads (46)
- Cables (20)
- Cassettes/Freewheels (27)
- Chainrings (23)
- Chains (28)
- Cranksets (10)
- Show More Categories
- Derailleurs (20)
- Forks (2)
- Handlebar Grips/Tape (18)
- Handlebars (5)
- Headsets (4)
- Pedals (27)
- Recumbent (3)
- Saddles (24)
- Seatposts (8)
- Shift/Brake Combinations (8)
- Shifters (14)
- Stems (7)
- Other (50)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
• 4 degrees of float both inward and outward

$95.49 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.

$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts.
- Material: 6061 aluminum
- 2-bolt adjustability
- Minimum insertion length: 90mm

$83.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

$65.00 - $79.95
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models)
- Features Drop-Stop tooth design to prevent unwanted chain drop
- Mount using the stock Shimano XTR M7 chainring bolts
- 49mm chainline for 28-34 tooth and 50mm for 36 tooth
- Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain)
- Made in the USA from 7075-T6 aluminum alloy - 41g (30t)

$29.99
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike.
- Fits forks with 1 1/8" steerer tubes
- Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm
- 7075-T6 aluminum
- Never use a star nut on forks with carbon steerers

$29.99
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike.
- Fits forks with 1 1/8" steerer tubes
- Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm
- 7075-T6 aluminum
- Never use a star nut on forks with carbon steerers

$5.95 - $15.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo
- 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains
- 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

$118.65
Thread together BB for 386EVO frames and 29mm spindle diameter SRAM DUB compatible cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement.
Bottom Bracket Includes:
- BB Cups with bearings
- 2x Silicone dust seals
- 2x 0.5mm crank spindle spacers
- 2x 1.0mm crank spindle spacers
- 1x 2.5mm crank spindle spacer
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: BB386EVO, PF30/83
- Bottom Bracket Shell Width (mm): 83mm - 92mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 29mm
- Over Bearing Width: 86.5mm in 86.5mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Weight: 126g
Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 29mm diameter spindle SRAM DUB compatible cranks:
- BB386EVO
- BB392EVO
- BBRIGHT
- PF30 with 83mm wide BB shell (downhill)

$74.00 - $118.65
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

$118.65
Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$118.65
Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

$118.65
BB86 threaded BB for Fat Bike PF41. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF41 - BB121, PF41 - BB132 - Bottom Bracket Shell Width (mm): 121mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: SRAM / Truvativ GXP - Crank Spindle Diameter: 22/24mm - Weight: 120g

$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$48.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$48.00
Wheels Manufacturing's SRAM compatible Universal Derailleur Hanger simplifies thousands of hanger designs into one universal standard. Machined completely out of aluminum, this new hanger is not only strong but designed to rotate backward and slip slightly in the case of an impact preventing chain jams and protecting the drive train. All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances.
- Compatible with bike frames designed to accept the SRAM UDH (Universal Derailleur Hanger)
- Compatible with all MTB and eMTB drivetrains
- Machined aluminum body anodized black
- Thru-Axle thread pitch M12 x 1

$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings.
0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment.
30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

$9.00
- Use without washers for two chainrings, with washers for one DH ring
- Bolts and nuts use hex keys
- Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers
- Length: 8mm
- Material: Steel
- Type: Hex

$23.00 - $28.00
- Trushift chainrings feature shift ramps and pins
- Drivetrain compatibility: 8, 9, 10, 11
- 104mm BCD

$16.99
Secure your Low Rider Rack with these trike specific mounting kits. Sold separately from the Low Rider Rack.
- Fit Kit for Low Rider Rack
- Fits: Rover
- Includes all hardware for mounting Low Rider Rack to Rover trikes

$69.95
The Seat Extender will allow for taller customers to now enjoy any TerraTrike that features the two-position fixed seat mount.
- Heavy duty chromoly construction
- Durable black powder coated finish
- Use of the Seat Extender limits the weight capacity of any TerraTrike to 320 lbs.
- Use of the Seat Extender will slightly reduce the foldability of the Traveler and may cause damage to the paint and frame.

$149.95
Get another 2" of width over the stock Rover seat by upgrading to this direct stock replacement. When paired with the Wide Handlebars (sold separately), this combo adds the cockpit room you need to make your ride even more enjoyable. The "Seat Mesh - Wide Rover" is also required and sold separately.
- Wide Seat frame for Rover trikes
- 2" wider than stock seat frame
- Added comfort for longer rides
- Requires Wide Seat Mesh
- Recommended add on: Wide Handlebars

$32.99
TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.

$70.00
Surly OD Bottom Brackets
- PF cups are 41mm in diameter
- Bearing I.D. is 24mm
- OD bottom bracket comes with telescoping center sleeve for added durability
- High quality double labyrinth sealed stainless Enduro bearings with corrosion resistant coating
- 3 additional 1mm spacers are provided to help with chain line and crank arm clearance

$30.00 - $35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.

$45.00
- Includes: 2-Super Sticky Kush tape rolls, 2- Aluminum Laser Etched Powder Coated Star Plugz, 2- High End Rubberized Finish Tapes
- Material: PU—Length: 2160mm Width: 30mm Thickness: 3mm
- Highly resistant to UV rays, climate, and sweat
- Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions
- Star Plugz: 100% aluminum bar plugs
Page 1 of 13
Next page